Rentals
Rent from us and get reliable equipment for any job. We carry a full line of new and late model Caterpillar and Dynapac units..
- Articulated Trucks
- Backhoes
- Compaction, Pull Type Pneumatic Roller
- Dozer, Large
- Dozer, Medium
- Dozer, Small
- Excavator, Large
- Excavator, Medium
- Excavator, Mini
- Graders
- Loader, Crawler
- Loader, Wheel
- Compaction, Single Drum Vibratory Rollers
- Compaction, Double Drum Vibratory Rollers
- Compaction, Soil
- Mobile Feeder
- Compaction, Pneumatic Roller
D8T Caterpillar
1 IN STOCK
ENGINE MODEL - C15 ACERT GROSS POWER - 348 hp OPERATING WEIGHT - 87 733 lb
SPECIFICATIONS
ENGINE
Engine Model Cat C15 ACERT
Net Power - ISO 9249 (DIN) 314 HP
Engine Power - J1995 348 HP
Global Emissions US Tier 4 Interim/ EU Stage IIIB
Bore 5.4 in
Stroke 6.75 in
Displacement 15.2 l
- Maximum speed 1,700 rpm.
- Engine ratings apply at 1850 rpm.
- Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator.
- No derating required up to 3566 m (11,700 ft) altitude, beyond 3566 m (11,700 ft) automatic derating occurs.
SERVICE REFILL CAPACITIES
Fuel Tank 643 l
Cooling System 77 l
Crankcase* 38 l
Powertrain 155 l
Final Drives (each) 12.5 l
Roller Frames (each) 65 l
Pivot Shaft Compartment 40 l
Hydraulic Tank 75 l
*With oil filters.
WEIGHTS
Operating Weight 87 733 lb
Shipping Weight 67 219 lb
-Operating Weight Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, SU-Blade, Single-Shank Ripper, 610 mm (24 in) MS shoes, and operator.
-Shipping Weight Includes coolant, lubricants, 20% fuel, ROPS, FOPS cab, and 610 mm (24 in) MS shoes.
BLADE
8A - Capacity (SAE J1265) 6.1 yd3
8A - Width, Over End Bits 16.3 FT
UNDERCARRIAGE
Shoe Type Moderate Service
Width of Shoe 24 in
Shoes/Side 44
Track Rollers per Side 8
Grouser Height 3 in
Pitch 8.5 in
Ground Clearance 24.3 in
Track Gauge 82 in
Length of Track on Ground 10.5 ft
Ground Contact Area 5554 in2
HYDRAULIC CONTROLS
Pump Type Piston-type, Variable Displacement
Pump Output (Steering) 276 L/min
Pump Output (Implement) 226 L/min
Tilt Cylinder Rod End Flow 130 L/min
Tilt Cylinder Head End Flow 170 L/min
Bulldozer Relief Valve Setting 3480 psi
Tilt Cylinder Relief Valve Setting 3480 psi
Ripper (Lift) Relief Valve Setting 3480 psi
Ripper (Pitch) Relief Valve Setting 3480 psi
Steering 5700 psi
-Steering Pump output measured at 2,300 rpm (pump speed) and 4351 psi.
-Implement Pump output measured at 1,850 rpm and 1000 psi.
-Electro-hydraulic pilot valve assists operations of ripper and dozer controls. A standard hydraulic system includes four valves.
-Complete system consists of pump, tank with filter, oil cooler, valves, lines, linkage and control levers.
TRANSMISSION
Forward 1 3.4 km/h
Forward 2 6.1 km/h
Forward 3 10.6 km/h
Reverse 1 4.5 km/h
Reverse 2 8 km/h
Reverse 3 14.2 km/h
1 Forward – Drawbar Pull (1000) 139 lbf
2 Forward – Drawbar Pull (1000) 76 lbf
3 Forward – Drawbar Pull (1000) 42 lbf
RIPPERS
Type Single-Shank, Adjustable Parallelogram
Number of Pockets 1
Maximum Clearance Raised (under tip, pinned in bottom hole) 25 in
Maximum Penetration (standard tip) 44.4 in
Maximum Penetration Force (shank vertical) 28 620 lb
Pry out Force 50 070 lb
Weight (without hydraulic controls) 9005 lb
Total Operating Weight (with SU-Blade and Ripper)* 87 733 lb
Type Multi-Shank, Adjustable Parallelogram
Number of Pockets 3
Overall Beam Width 97 in
Maximum Clearance Raised (under tip, pinned in bottom hole) 23.35 in
Maximum Penetration (standard tip) 30.7 in
Maximum Penetration Force (shank vertical) 27 920 lb
Pry out Force (Multi-Shank Ripper with one tooth) 51 230 lb
Weight (one shank, without hydraulic controls) 10752 lb
Additional Shank 732 lb
Total Operating Weight (with SU-Blade and Ripper)* 89479 lb
*Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, blade, single-shank ripper, 610 mm (24 in) MS shoes, and operator.
WINCHES
Winch Model PA14OVS
Weight* 3947 lb
Oil Capacity 15 L
Increased Tractor Length 22.2 in
Winch Length 56.3 in
Winch Case Width 45.6 in
Drum Width 12.6 in
Flange Diameter 18 in
Recommended Cable Size 1.13 in
Optional Cable Size 1.25 in
Drum Capacity – Recommended 276 ft
Cable Size
Drum Capacity – Optional Cable 193 ft
Cable Ferrule Sizes – Outside Diameter 2.36 in
Cable Ferrule Sizes – Length 2.76 in
-Variable speed, hydraulically driven, dual braking system, three roller fairlead.
* Weight: Includes pump and operator controls.
DIMENSIONS - STANDARD
Width of Tractor over Trunnions 10 ft
Length of Basic Tractor (Tag link trunnion to tip of rear grouser) 15.2 ft
Length of Track on Ground 10.5 ft
Length with Ripper – Single Shank (with tip at ground line) 21 ft
Length Ripper – Multi Shank (with tip at ground line) 20.8 ft
Machine Height with Stack 11.5 ft